低孔隙度疏松铝的高压声速与冲击熔化

对含微孔洞疏松度m=1.04的疏松铝进行了冲击加载-卸载实验,利用DISAR(distance interferometer system for any reflector)测得了53至99 GPa五个冲击压力下疏松铝/LiF界面粒子速度波剖面,获得了各压力下的纵波声速和其中三个压力点的体波声速,确定出疏松铝的冲击熔化压力约为81 GPa,确定出高压下冲击熔化前的泊松比约为0.372.通过分析,微孔洞明显降低了冲击熔化压力,引起的非谐振效应明显,状态方程计算中考虑非谐效应,非谐因子l 关键词： 低孔隙度 疏松铝 声速 冲击熔化     

Cellulosic nanocomposite membranes from hydroxypropyl cellulose reinforced by cellulose nanocrystals

Cellulosic nanocomposite membranes were prepared by incorporation of cellulose nanocrystals (CNCs) into a hydroxypropyl cellulose (HPC) matrix using a mixing/evaporation technique. CNCs were obtained from filter paper using the sulfuric acid hydrolysis method with the aid of ultrasonication. The relationship between the microstructure and mechanical properties of the CNCs/HPC nanocomposite membranes was studied. Scanning electron microscopy showed that the CNCs were well dispersed in the HPC matrix, and the fracture surface demonstrated a fibrous characteristic. With increasing CNCs content, the tensile strength and Young’s modulus of the CNCs/HPC nanocomposite membranes gradually increased. At 5 wt% content of CNCs, the strength was increased by 525 % and the Young’s modulus by 124 % compared with pure HPC membrane. Moreover, the effect of the phase change of HPC on the mechanical properties of the CNCs_5wt%/HPC nanocomposite membranes and the corresponding mechanism were also studied.     

超高效液相色谱-线性离子阱/静电场轨道阱质谱快速筛查和确证化妆品中孔雀石绿、结晶紫及其代谢物

采用超高效液相色谱-线性离子阱/静电场轨道阱组合式高分辨质谱联用技术,建立了快速筛查、定性识别化妆品中的孔雀石绿、隐色孔雀石绿、结晶紫和隐色结晶紫的方法。不同剂型的化妆品样品经甲醇提取后,通过静电场轨道阱高分辨质谱全扫描得到目标化合物准分子离子的精确质量数,据此对化妆品进行快速筛查,并用离子阱的二级质谱分析对化合物进行了进一步确认,4种化合物检出限≤5μg/kg。方法适用于化妆品中孔雀石绿、隐色孔雀石绿、结晶紫和隐色结晶紫的快速筛查和确证。     

Characterization of size‐segregated aerosols using ToF‐SIMS imaging and depth profiling

Size‐segregated particles were collected with a ten‐stage micro‐orifice uniform deposit impactor from a busy walkway in a downtown area of Hong Kong. The surface chemical compositions of aerosol samples from each stage were analyzed using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) operated in the static mode. The ToF‐SIMS spectra of particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were compared, and the positive ion spectra from stage 2 to stage 10 were analyzed with principal component analysis (PCA). Both spectral analysis and PCA results show that the coarse‐mode particles were associated with inorganic ions, while the fine particles were associated with organic ions. PCA results further show that the particle surface compositions were size dependent. Particles from the same mode exhibited more similar surface features. Particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were further selected as representatives of the three modes, and the chemical compositions of these modes of particles were examined using ToF‐SIMS imaging and depth profiling. The results reveal a non‐uniform chemical distribution from the outer to the inner layer of the particles. The coarse‐mode particles were shown to contain inorganic salts beneath the organics surface. The accumulation‐mode particles contained sulfate, nitrate, ammonium salts, and silicate in the regions below a thick surface layer of organic species. The nucleation‐mode particles consisted mainly of soot particles with a surface coated with sulfate, hydrocarbons, and, possibly, fullerenic carbon. The study demonstrated the capability of ToF‐SIMS depth profiling and imaging in characterizing both the surface and the region beneath the surface of aerosol particles. It also revealed the complex heterogeneity of chemical composition in size and depth distributions of atmospheric particles. Copyright © 2014 John Wiley & Sons, Ltd.     

基于离子通量的电位型传感器检测鱼精蛋白

体外循环后精确控制鱼精蛋白用量对抗肝素,是预防鱼精蛋白中毒性反应的关键环节.由于血液中存在高浓度的亲脂性钾离子(如血液中钾离子的浓度约为5mg/L,血细胞中钾离子的浓度高达150mg/L),而传统的聚阳离子选择性电极膜相中含有阳离子位点,在这种情况下,钾离子很容易进入聚合物膜相而干扰鱼精蛋白阳离子的测定.为了克服血液中钾离子的干扰,开发了肝素活化的聚阴离子选择性电极技术,成功实现了鱼精蛋白聚阳离子的检测,高浓度的钾离子不干扰测定.在最佳条件下,该电极对鱼精蛋白聚阳离子的检出限可达0.1mg·L-1,线性范围为0.5~10mg·L-1.     

Catalytic performance of cement clinker supported nickel catalyst in glycerol dry reforming

The paper reports the development of cement clinker-supported nickel （with metal loadings of 5 wt%, 10 wt%, 15 wt% and 20 wt%） catalysts for glycerol dry （CO2） reforming reaction. XRF results showed that CaO constituted 62.0% of cement clinker. The physicochemical characterization of the catalysts revealed 32-folds increment of BET surface area （SBET） with the addition of nickel metal into the cement clinker, which was also corroborated by FESEM images. Significantly, XRD results suggested different types of Ni oxides formation with Ni loading, whilst Ca3SiO5 and Ca2Al0.67Mn0.33FeO5 were the main crystallite species for pure cement clinker. Temperature-programmed reduction analysis yielded three domains of H2 reduction peaks, viz. centered at approximately 750 K referred to as type-Ⅰ peaks, another peaks at 820 K denoted as type-Ⅱ peaks and the highest reduction peaks, type-Ⅲ recorded at above 1000 K. 20 wt% Ni was found to be the best loading with the highest XG and H2 yield, whilst the lowest methanation activity. Syngas with lower H2/CO ratios （0.6 to 1.5） were readily produced from glycerol dry reforming at CO2-to-Glycerol feed ratio （CGR） of unity. Nonetheless, carbon deposit comprised of whisker type （Cv） and graphitic-like type （Cc） species were found to be in majority on 20 wt%Ni/CC catalysts.     

β-CD辅助的9-(2,3-环氧丙基)嘌呤核苷的水相合成

室温条件利用β-环糊精作为助剂,通过亲核取代反应在水相中合成了一系列9-(2,3-环氧丙基)嘌呤核苷。本方法操作简单,反应条件温和,收率较高。β-CD的作用在于通过与底物包结增加它们在水中的溶解度,减少副反应发生,促进反应进行。     

Synthesis of CuI Trifluoromethylselenates for Trifluoromethylselenolation of Aryl and Alkyl Halides

The development of new strategies for synthesis of trifluoromethylthiolate compounds is of considerable importance in pharmaceuticals, agrochemicals, and advanced materials. Accordingly, currently much attention is being devoted to the development of effective methods and reagents for their synthesis. In contrast, considerably less effort has been afforded to the development of preparing C?SeCF₃ bonds. Herein we report a concise route to synthesize a family of copper(I) trifluoromethylselenolate reagents by the reaction of CuI with the Ruppert’s reagent (Me₃SiCF₃), KF, and elemental selenium in the presence of dinitrogen ligands in CH₃CN at room temperature. The reagent [Cu(bpy)(SeCF₃)]₂ was proven to be air‐stable and highly efficient for nucleophilic trifluoromethylthselenolation of a broad range of (hetero)aryl halides and alkyl halides. This method represents a powerful protocol for the construction trifluoromethylselenolate compounds.     

An appraisal of the Suzuki cross-coupling reaction for the synthesis of novel fluorescent coumarin derivatives

We report the chemical design and development of 3-aryl-substituted 7-alkoxy-4-methylcoumarins with enhanced fluorogenic properties. The 3-aryl substituents are installed via an optimized Suzuki–Miyaura cross-coupling (SMC) reaction between a 7-alkoxy-3-bromo-4-methylcoumarin and aryl boronic MIDA esters using Pd(OAc)₂/XPhos in a catalytic system with K₂CO₃ in aqueous THF. Under these conditions, an exocyclic ester functionality is found to be unaffected. Subsequent saponification revealed a carboxylic acid functionality that is suitable for conjugation reactions. Evaluation of their fluorescence properties indicated that the installed 3-heteroaryl substituent, particularly benzofuran-2-yl, resulted in a significant red shift of both the excitation and emission wavelengths.     

Temperature-induced inversion of elution order in the chromatographic enantioseparation of 1,1′-bi-2-naphthol on an immobilized polysaccharide-based chiral stationary phase

In this work, the enantioseparations of 1,1′-bi-2-naphthol (BINOL) and its three derivatives were performed on an immobilized polysaccharide-based chiral stationary phase, Chiralpak IA, under normal-phase mode. The effects of the content of polar modifier in the mobile phase and the column temperature on the retention and enantioseparation were investigated in detail. Temperature-induced inversion of elution order for BINOL was observed directly when n-hexane/2-propanol (92/8, v/v) was used as mobile phase. The isoenantioselective temperature (T_iso) was calculated to be 31.4 °C. When n-hexane/2-propanol/THF (93/2/5, v/v/v) was used as mobile phase, the T_iso value decreased to −8.2 °C. Entropically driven enantioseparation which had practical application was obtained successfully (separation factor being 1.189 and 1.332 at 25 °C and 50 °C, respectively). The corresponding thermodynamic parameters for other three binaphthyl compounds were compared with that for BINOL. Some inferences about chiral recognition mechanism were stressed.